Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$39.99
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

$59.99
Protects the bicycle from sweat and avoids corrosions or rust.
- Prevents an accumulation of sweat on the frame and components that would lead to corrosion or affect the finish
- Sits above the top-tube and can be adjusted for different bicycles
- Washing-machine friendly

$39.99
Adjust resistance on Mag trainer without leaving the saddle.
- Quick Release mounting system fits most stems.
- For use with the Mag bike trainer only

$69.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.

$11.99
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

$13.99
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions.
- Highly absorbent
- Measures 30cm x 115cm

$249.99
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds.
The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store.
The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers:
- T1980 Bushido (ANT+)
- T2020 i-Genius
- T2050 Tacx IRONMAN trainer
- T2060 Tacx IRONMAN Smart
- T2080 Genius Smart with Upgrade Smart
- T2170 i-Vortex
- T2180 Vortex Smart with Upgrade Smart
- T2240 Flow Smart with Upgrade Smart
- T2780 Bushido Smart with Upgrade Smart

$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

$50.00 - $54.99
Blackburn's axle conversion kits make your thru axle bike compatible with most trainers and many trailer hitches on the market. The adapter kit is designed to turn your 12mm x 135mm, 142mm, or 148mm thru-axle bike into a trainer-ready machine or a trailer-pulling family explorer. Choosing the correct axle is simple. First, research which axle spacing your bike utilizes (135, 142, or 148mm). Next, choose the correct thread pitch by either comparing your thread spacing to Blackburn's thread scale on the packaging or by matching to one of the brands listed below:
- RockShox Maxle - 1.75mm thread pitch
- Syntace X-12 - 1.0mm thread pitch
- DT x-12 - 1.0mm thread pitch
- Shimano E-Thru - 1.5mm thread pitch
- DT E-Thru - 1.5mm thread pitch

$62.99
The Elite Folding Mat increases the comfort of your home cycling setup while protecting the surfaces you train on every day. It's easy to use, store, and transport and can be stored everywhere in your house.
Dimensions: 1.8m x .9m

$14.99
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition.
• 130mm width

$29.99 - $54.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

$29.99
The Gel Block is an indispensable accessory for perfecting your position on the bike and provides a more natural feel to your training.
- Reduces vibrations on the handlebars for more comfortable training
- Non-slip Elastogel insert ensures maximum stability and alignment of the front wheel
- Suitable for road and MTB

$129.99
Everything you need for the best indoor trainer experience possible.
- Can be used across a wide range of trainer setups.
- Includes Trainer Mat, Climbing Block and Saris towel.

$24.99
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.

$29.99
$29.99
On Sale
- Includes clutch knob and L-bolt
- Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt
- Magnus Clutch Knob should only be used with Magnus Smart Trainer
- Watch our video to learn more

$13.45
Blackburn's Sweat Net protects your precious bicycle and components from the corrosive effects of perspiration as you log indoor miles. It's made of washable terry cloth and fits most bicycles.
- Fits most road and mountain bikes

$89.99
Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer.
- Reads data based on the type of trainer used.
- Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices.
- When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.

$19.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

$39.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

$79.99
Whether mashing or spinning, riding in the saddle or out, KICKR’s AXIS feet let cyclists of all types customize the ride feel, enhance feedback and offer a more realistic training experience to match their unique riding style.
- Active feedback
- A tuned ride
- Reduce fatigue, go longer
- KICKR AXIS feet create a realistic ride feel providing up to 5 degrees of side-to-side movement.

$29.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

$39.99
This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly
- Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6%
- Anti-slip rubber feet eliminate handlebar vibrations
- Internal design that guarantees maximum wheel stability
- Suitable for both road and MTB
- You can attach to the trainer frame when not in use for easy transport and storage

$66.00
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party!
- Non-slip surface keep you safe while in cycling cleats
- Protects floors from sweat and bike grime
- Water-repellent surface does what it was designed to do – keep sweat off your floor
- Compress-ability ensures trainer stays put during intense efforts
- Easily rolls up for storage
- Cleans easily with soap and water
- Absorbs noise and vibration
- Enhances overall stability of any indoor trainer setup
- 4mm (5/32?) thickness is optimal balance of support and storage

$24.99
The Saris Leveling Block keeps your bike level with your trainer.
- Adds stability to your training ride.
- For use with any rear wheel-mounted trainer.
- Raises front bicycle tire 1.1 inches (2.8 cm) off the ground

$19.99
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only

$36.99
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles.
- Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media
- SM clamp easily mounts or dismounts from the handlebar or tube
- Spring-loaded clamp system is simple to use and securely holds your device in place
- Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system
- Can mount to your repair stand so you can easily reference the Internet when working on your bike

$99.99
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
Page 1 of 2
Next page