Other
$173.00
38mm Suspension Fork Parts
$154.20
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss EXP 54 Tooth Upgrade Kit w/ Bearing
$130.00
38 Air Shaft Assembly for Fox suspension forks.
$106.00
Upgrades your 1x bike to the familiar ergonomics of a left shift lever.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$99.99
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide RS
$85.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$78.00
Fit Kit SET813 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12 mm rear thru axle.
This kit includes:
- 12 x 154—172mm thru axle with 1.0 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$77.00
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R
$69.99
Eliminate dropped chains forever with the new OneUp Components Guide.
As the trend for lower and slacker bikes continues, 'Little bikes' are getting more and more capable everyday. Revised for 2019 the OneUp Guide uses simple, one tool installation and adjustment as well as an all new tool less flip
At only 40g the OneUp Chain Guide weighs less than a sip of water.
WHY DO I NEED A GUIDE AND A NARROW WIDE CHAINRING?
NW rings are awesome, but they're not perfect and every once in a while you can drop a chain while riding. On a social ride this means getting dropped by your friends. But when racing an Enduro a dropped chain can cost you the podium, which is why almost every EWS pro runs both a chainguide and narrow wide chainring.
FEATURES
- Tool less upper guide flip
- Install without removing your crank
- Single tool install and adjustment (4mm hex)
- Boost compatible
- Oval Compatible
- Black Stainless Steel hardware
- Patented US 10,053,188 Other Patents Pending
SPECS
- Weight: 40g
- Capacity: 26-38T
- Chainline: 7.5mm adjustment
- Mount: ISCG05
- Color: Black top guide piece included
- Material: 7075 aluminum, top guide glass reinforced thermoplastic
$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$64.99
Triggy Alpha - The name speaks for itself - the new pack leader of dropper remotes. Since the beginning our Triggy has proven to be a favourite among many many pro riders and testers but with Triggy Alpha we have now set the bar even higher and we confidently say: There is no better remote on the market.
The video is pretty much explaining very well what makes Triggy Alpha stand out amongst others:
- Ball bearing on the paddle
- Angle-adjustable paddle
- Black anodized aluminum body and paddle with laser engraved finish
- 2 available paddle lengths for crisp or soft dropper engagement
- 2 mounting holes
- Integrated cable tensioner
- Direct mount for almost any brake available (see mounting options)
- New cable clamping for universal dropper compatibility
- Extremely low weight: 32g/34g (short/long)
- Maximum cable pull: 11 mm
The short version mimics our proven original Triggy paddle geometry. The long variant features a 7mm longer paddle and reduces the required forces by about 15%.
Triggy Alpha is compatible with any commonly available aftermarket cable-actuated dropper post on the market.
1 set Triggy Alpha includes:
- 1x Triggy Alpha remote (short or long)
- 1x shift cable
- 1x wire endcap
- 1x BikeYoke Splits Clamp or I-Spec Adapter (optional)
$3.00 - $61.99
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade.
- Slick-Lube lined housing reduces friction for faster cable movement and better braking response
- High carbon internal steel coil for improved stiffness
- Appropriate for Teflon coated cables as well as steel and galvanized
- Length: 10m
$59.99
Choose our 2X remote for your dropper if you don't have enough space for a Triggy under your left side handle bar, for example if you are still running 2-by or 3-by shifting with front derailleur or if you have anoter remote for suspension or e-support. It also features a hinged clamp, that allows snapping your remote onto your handlebars without having to take off grips or brake levers.
The clamp is made from a high-tech plastic compound and aluminium. The paddle itself is made from 6061-T6 aluminum, black anodized and finished with a dark anodized BikeYoke logo.
Allowing a maximum of 10mm cable pull our 2X is compatible with any known dropper post on the market. The cable/wire is clamped via screw on the lever itself.
$59.99
Many dropper posts feature remotes, that do not live up to a standard, that you would expect, when paying a lot of money for a dropper post. Even the most expensive droppers out there often come with remotes, that have ridiculous play, are made from plastic, bulky, heavy, or just do not function as they could.
We put a lot of time and testing into the design of a remote lever that fulfils everything we want to see in a remote for dropper posts and since its introduction it has proven to be a favourite of many pro-riders and testers.
Features:
- Super lightweight (24g without clamp)
- Made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved
- You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp
- Exceptional finish and touch
- Individual mounting points to adjust position
- Integrated cable tensioner
- 12.5 mm of maximum cable pull
1 set Triggy includes:
- Remote lever unit (black anodized and laser engraved aluminum body and lever with cable tension adjuster)
- Shift cable
- Shift cable endcap
- 1x "Splits" clamp or I-Spec adapter (optional)
$59.99
Genuine replacement parts
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
Details:
- Replacement cartridge units for Bontrager Line Dropper seat posts
- Be sure to use the correct size cartridge for the respective amount of travel
- Regular maintenance will help maintain performance and extend the lifespan
$59.99
34 Rhythm Air Shaft Assembly for Fox suspension fork service and repair.
$55.00
Wheels Manufacturing Angled Spacer Single Speed Conversion Kit is a Shimano- and SRAM-compatible single speed conversion kit with ramped spacers. Additional spacers are included to dial-in chainline. Includes: - (2) - 9mm angled spacers - (6) - 3mm spacers - (2) - 1mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any 1/2 x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain * Does not work acceptably with 10 or 11-speed chains
$52.99
Genuine replacement parts
The e*thirteen chain guide developed with Bosch helps keep the chain locked on the chainring when pedaling over rough terrain.
Provides confident and consistent pedaling over rough terrain.
- Two-bolt nylon backplate mounts directly to Bosch motor
- 34-38 tooth compatibility
- Does not fit traditional ISCG mounts
- Designed for Trek 2020-2021 and select 2022 Rail & Powerfly models
- Included hardware is available separately to convert to 55mm chainlines (See Service Parts)
$49.99
I-SpecBar Clamps are a one-piece hinged clamp adapter that allows users to mount I-Spec compatible shifters or dropper levers onto the handlebar, without requiring an I-Spec brake lever.
- Sold individually, the clamp can be mounted to the right or left side
- Hinged clamp for easy installation without removing other components
- Black Anodized, CNC AL-6061 Aluminum
- Compatible only with Shimano I-Spec II compatible shifters or dropper post remotes
- 23g
$49.99
Tellis Remote for Matchmaker
- Tellis dropper post remote lever features light action with a forged alloy design
- Fits 22.2mm diameter handlebars
$49.50
If you're not looking for chain retention or your bike has an integrated chain guide, you can still add some bash protection with the OneUp ISCG05 Underbash.
The Underbash includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. Designed for frames with 2 ISCG05 tabs only (Evil, Rocky Mountain, etc). If your bike has three ISCG05 tabs, check with the frame manufacturer to ensure the lower tabs are strong enough for a bash application. Failure to do so could result in frame damage.
FEATURES
- Install without removing your crank
- Single tool install and adjustment
- Boost compatible
- Oval Compatible
- Stainless Steel hardware
- Includes 3 bash plates (28-30T, 32-34T, 36T)
SPECS
- Weight: 68g 32-34T
- Capacity: 28-36T
- Chainline: 2.5mm adjustment
- Mount: ISCG05 2-Bolt ONLY
- Color: Black
- Material: 7075 aluminum, glass reinforced thermoplastic
$49.00
Our redesigned Puget 1x Lever, takes the place of our prior Puget 1x lever. With a weather-proof sealed cartridge bearing, enhanced ergonomics, and a textured paddle for enhanced grip, this budget-friendly lever looks and feels at home even on high-end builds.
Designed to be used with bikes using a single front chainring, this is a "shifter style" lever. The lever comes with our standard 22.2mm clamp handlebar mount as well as two ports for adjustability.
$49.00
Original equipment hydraulic hoses for no-compromise brake performance.
- Fits All B (2016+) Versions of Guide RSC RS R
- Hose length: 2000mm
$48.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
- Cane Creek Hellbender Bearing, 52mm SHIS
$47.00
Eyelet Bushings for repair and maintenance of Rockshox rear shocks.
$45.00
DebonAir air spring assembly to update Pike and Revelation forks.
$45.00
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs.
- Wide-narrow pulley tooth profile holds the chain better
- Stainless steel sealed cartridge bearings
$44.99
UPGRADE ANY DROPPER The V3 Dropper Remote is a lighter action remote with a replaceable rubber thumb pad and integrated cable port. Available in 7 colours, all major clamp standards and as a remote only option so you can reuse your existing V2 clamp. It's the easiest way to upgrade any mechanical dropper. REPLACEABLE RUBBER THUMB PAD A grippy rubber thumb pad improves lever feel and can be colour matched to your bike. The integrated cable port with cut marks makes installing your remote even easier. It also keeps your cable end tidy and lets you install without a cable crimp for a super clean look. LIGHTER ACTION DESIGN The new lever cam reduces the thumb force needed to actuate your dropper post. It requires 27% less actuation force than our V2 remote. Upgrading your remote is a quick and easy way to improve the feel of any mechanical dropper post for less than $50. EASY INSTALL The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. The integrated cable port includes cut marks that take the guess work out of cutting your cable and lets you tuck the cable away for you a super clean look. Compatible with all cable actuated dropper posts. KIT INCLUDES 1 Remote body 1 black thumb cushion Cable, housing, cable end & barrel end
$42.00
- Lever Internals Gen 2 Guide RSC/Ultimate|Code RSC Qty 1
Page 1 of 4
Next page