Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Bottom Brackets

$379.00 - $479.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for.
With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency.
The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product.
The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag.
Compatible with:
- Frame: Italian BB
- Opening diameter: Threaded
- Shell width: 70mm
In the box:
- 2 cups with CeramicSpeed Bearings installed
- 2 dust covers
- 4 x 1mm spacers
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet
- Spacer tube

$118.65
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g

$50.00 - $54.00
Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Designed for use with SRAM Wide Cranksets
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Compatible with Cannondale Ai frames
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$49.99
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$52.00 - $66.00
Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

$46.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$46.00
The new SRAM DUB bottom bracket series has a simple job: connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride.
- One oversized spindle to work across every bottom bracket standard.
- Significantly lighter than PFGXP system
- Easier installation by allowing you to press the bearing cups into the frame

$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$44.99
Designed to be used with X-Type or EXI cranksets. Manufactured from high strength aluminum & featuring custom retainer bearings.
Features
• BB Cups are forged & CNC machined from 6066 aluminum.
• Tapering wall construction to minimize weight.
• Custom 6805 16 ball retainer bearing
• Bearings feature our custom triple wiper seal to better retain grease & keep contaminants out.
• Bearings are factory filled with Phil Wood waterproof grease — tested & proven to extend bearing life.

$41.00
- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks
- BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks
- BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself)
- BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks
- BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks
- BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks
- BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks
- BB-4000 is for 19mm spindle 69mm shell Omega cranks
- BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks
- 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

$46.00
- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension
- Mountain sets include bearings, shields, c-clips and spacer
- Choose ceramic or stainless steel options

$66.00
ISIS revolutionized bottom bracket spindles. Keep yours spinning smoothly with this Platinum ISIS Bottom Bracket from FSA.
- Forged, hollow chromoly spindle with titanium nitride coating
- Integrated, large ball bearing design
- Cold-forged aluminum cups
- Includes crank bolts

$479.00
The EVO386 standard is designed for oversized spindles. CeramicSpeed's kit for Shimano allows you to install Shimano or FSA cranks with 24mm spindles.
The cups come with CeramicSpeed Bearings installed. Both CeramicSpeed Standard and Coated Bearings are available. Both utilize super smooth CeramicSpeed Balls and hardened-steel races. The latter has an additional metallic coating on the races to further smooth and harden the steel, further increasing life and lowering drag.
The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system.
The CeramicSpeed Standard Bearings feature an average drag reduction of 75% compared to stock bottom brackets. That translates into frictional drag of 0.3-0.4 watts per set, which is the result of great design, hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition.
The CeramicSpeed Coated Bearings are a step up as they reduce drag by 50% compared to our Standard Bearings and an improvement in bearing life by 60%.
All Round Grease comes standard in the bearings, but can be replaced for lower drag TT and Track Grease or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions.
In The Box:
- 1 bottom bracket with bearings installed
- 2 dust covers
- 10ml syringe of All Round Grease
- Sticker Sheet

$15.99
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested

$18.99 - $20.99
Shimano BB-ES300 Octalink V2 Bottom Brackets
- Fits Shimano Octalink V2 Spline Cranksets
- Crankarm fixing bolts not included

$141.95
T47 threaded BB cups to run 30mm spindle cranks on T47 frames. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68 – 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.2mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16-notch

$18.00 - $27.99
FSA PowerPro JIS Cartridge Bottom Brackets.
- Includes bolts
- Spindle Interface Type: Square Taper JIS
- BB Shell Width (mm): 68
- BB/Frame Interface: English

$116.99 - $124.99
The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance.
- 440C stainless steel bearings, dual lip seal, marine grease
- Machined aluminum cups

$144.53
Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

$50.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$379.00
This bottom bracket is perfect for when you have a PF30, BBright, or 386EVO shell frame and want to install a crank with a 30mm spindle into the frame. All these frame standards have a 46mm inner diameter and smooth insides, though the widths vary from 68mm to 86mm.
This bottom bracket features nearly zero loss of power due to friction, thanks to the CeramicSpeed's incredibly efficient bearings. Choose either our Standard or Coated Bearings—both have super-round, super-smooth CeramicSpeed balls rolling on hardened-steel races. The Coated version has a metallic coating laid onto the races, making them even harder and smoother and resulting in longer life and lower drag. They come installed in cups.
30mm spindles on cranks are increasingly popular because of the high stiffness and low weight. 46mm inner diameter bottom brackets are popular for the freedom they offer designers in building frames. Because of the variety of widths, the cups here extend into the shell and come with a telescoping spacer tube to further seal and stiffen the system.
The bottom bracket is already stiff thanks to hard ceramic bearings and hardened-steel races. Thanks to CeramicSpeed, it also generates nearly zero drag. Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction versus conventional BBs. The bearings also last at least 3x longer than other bearings.
You can change the grease to fine-tune your BB's performance characteristics. TT and Track, All Round, and LongLife are greases CeramicSpeed designed. The first has the least drag, while the last is the most durable. All Round, in the middle, comes standard in road bearings.
In The Box
- 2 cups with bearings installed
- 2 1mm spacers
- 2 0.5mm spacers
- 2 dust covers
- O-ring
- Spacer tube
- 10ml All Round Grease
- Sticker sheet

$118.65
Thread together BB for 386EVO frames and 22/24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement.
- Bearings: Enduro ABEC-3
- Bottom Bracket/Frame Interface: BB386EVO, BB392EVO
- Bottom Bracket Shell Width (mm): 86mm - 92mm
- Bottom Bracket Shell I.D.: 46mm
- Crank Spindle Diameter: 22/24mm
- Over Bearing Width: 91.8mm in 86.5mm wide shell
- Over Bearing Width Dimensions include supplied silicone dust shields
- Weight: 145g
Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 22/24mm diameter spindle cranks:
- BB386EVO
- BB392EVO

$176.40
Convert your PF30 frame to a single-speed setup with our simple to use bottom bracket. Enduro Angular Contact sealed bearings. Double lip seals on all bearings with high fill rate top quality grease for maximum durability. Machined aluminum cups are superior in function and durability to plastic. Fully serviceable. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Chain Adjustment: 12mm - Crank Spindle Type: GXP (SRAM, Truvativ, etc.) - Crank Spindle Diameter: 22/24mm - Weight: 194g

$27.00 - $28.00
Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame.
- Aluminum
- Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame
- Install with headset press (not included) and green Loctite (included)

$99.00 - $124.99
The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance.
- 440C stainless steel bearings, dual lip seal, marine grease
- Machined aluminum cups

$27.95
- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components
- Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections
- Ultra-Torque OS Fit BB-cup tool is required for adapter installation

$144.53
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 158g
Page 1 of 7
Next page