Strong, light, and capable An oversized 35mm clamp diameter MTB stem that offers increased strength and minimal weight The Kovee Pro 35 stem is the perfect centerpiece for cross country race bike. This lightweight stem is optimized for the latest XC mountain bike standard, with a 35mm clamp diameter that combines with a 35mm handlebar to provide a stronger, lighter system. - Oversized 35mm clamp diameter offers increased strength and minimal weight - 6061-T6, 3D, forged alloy construction - Laser-etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Knock Block system protects frame from impacts from over-rotation of bars and fork crown - Available in a wide range of sizes for today's mountain rider - High-strength, corrosion-resistant steel bolts - Approved for carbon bars
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$40.00 $89.99 56% Off
A traditional, lightweight, alloy stem with increased compliance for road and MTB use. Light as carbon. Strong as hell. The super compliant 7050-T6 aluminum alloy Race X Lite bike stem is light enough for the road but strong enough for the mountain. It features a flip-flop 7 degree rise and 31.8 clamp that help it excel in lightweight versatility for a variety of hand positions. - 7050-T6, 3D, forged alloy construction - 4-bolt face plate helps distribute clamping load on ultra-lightweight handlebars - Angled steerer tube clamp spreads clamping pressure on steerer and is carbon friendly - Countersunk, corrosion-resistant steel bolts do not require washers - Dual clamp bolts are strategically positioned to evenly distributing clamping forces - This stem requires at least 5mm of spacers above and below the steerer tube clamp area - Go green and save green – Zero packaging means zero waste and zero extra cost
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
The Bontrager XXX Integrated Handlebar/Stem is a one-piece carbon bar/stem combo that brings clean looks and light weight to any road bike. Lightweight 100% OCLV Carbon construction offers a great road feel and control, while calibration marks and a flat front surface ensure easy lever installation. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Product details - Seamless accessory integration with Blendr - Flat surface front of bar for clean cable routing - Calibration marks allow precise, accurate and repeatable brake lever position - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV Carbon construction - Internal relief channel eliminates need for additional spacer above stem - Safe for use with carbon and alloy steerer tubes - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
$47.00 - $53.00
TruVativ's AKA Stem is 3D forged from 7050 aluminum for durable strength in all conditions. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness. This stem perfectly balances weight and strength for your trail or all mountain bike.
$89.99 - $109.99
Good looks and great design are abundant in 3T's ARX Team stem. It's made of forged aluminum with titanium bolts for light weight and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure 4-bolt faceplate.
The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you. - Compatible with model year 2016/17 Madone - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV carbon fiber construction - Seamless accessory integration with Blendr - Blendr accessory bases and mounts sold separately
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping. - Material: Carbon Fiber - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 41mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Steer Tube: 5.5Nm - Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
The Hope AM/Freeride Stem is light, stiff, and provides pin-point steering. It's proudly CNC'd in the UK from solid billet 2014-T6 and features opposing steerer and moto-style handlebar clamp for exceptionally rigid steering characteristics. - 10.9 DIN chromoly bolts - Weight: 135g
The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US-sourced 2024 aircraft alloy. - Stack height: 36mm - Weight: 155g (90mm)
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
There's no reason a bantam-sized rig shouldn't have the advantages a top-notch stem provides. Promax's Impact Mini Stem fits the bill with rock-solid bar clamping, stunning good looks, and the stiffness to nab the holeshot and keep it on-line through the berms. Set that mini up right! - Cold-forged and CNC-machined from 6061-T6 aluminum alloy - Top-load clamp design - Fits 1-inch steerer tubes
- Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: +17 degrees, -17 degrees - S.H.I.S. Stem Clamp Diameter: 31.8mm
Built strong to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Direct mount stem gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design - Designed to pair with BoXXer fork
The RaceFace Atlas 35 direct mount stem is an all new 2-piece direct mount design. Super lightweight, low profile design with flush mount bolts and 5mm spacers kit to let you dial in your perfect set up. - Machined from 2014 Aluminium - Weight-saving single bolt faceplate
$49.99 - $69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
The Impact is Promax's top-load BMX stem. They come in 48-, 53-, and 60-millimeter extensions and are cold-forged from the highest quality 6061-T6 aluminum then CNC-machined to refine the shape and further reduce weight. The “open” design keeps weight low while maintaining plenty of strength and ensuring your bars stay put. - Weight: 9.8oz. - Stack height: 30.5mm
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Dial in your perfect bike fit with FSA's Omega Stem. 3D-forged and CNC machined construction makes this stem stiff and light for power transfer and steering precision. The four-bolt faceplate holds bars securely, and this stem features stainless steel bolt hardware.
$14.99 - $19.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager XXX Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
Promax takes handlebar control up a notch with their S-35 Stem. Its oversize 35mm handlebar clamp cranks up the cockpit stiffness without adding weight or sacrificing any strength. - 3D cold-forged and CNC-machined from 6061-T6 aluminum alloy
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm
$33.95 - $34.95
Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
$98.99 - $104.99
Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. Deity's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - 55mm wide clamping platform - Bar Clamp Diameter (mm): 31.8 mm - Material: Aluminum - Length: 35 mm - Stem Angle (deg): 0 deg - S.H.I.S. Stem Clamp Diameter: 28.6 - Stack Height: 30 - Weight: 135 g
Page 1 of 3 Next page