29-Inch

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

Enduro-inspired performance meets XC efficiency—for your e-bike! By borrowing the best traits from the popular Martello, Barzo, and Gato models, the Agarro utilizes proven technologies from both the Enduro and XC categories. This combination of performance is ideal for the Trail category, as it provides predictable grip and efficiency in a mix of conditions. - Graphene 2.0 compound reduces rolling resistance and increases range and battery life - Leading-edge steps for fast-rolling while still climbing better in technical terrain at slow speeds - Progressive sipe width for tactile grip on rocks and roots

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

The Mazza Race has been developed to provide the best combination of riding feeling and performance for technical trails at maximum speed. Deep siping allows the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp, but digs in on climbs, making Mazza a top choice for both front and rear use. - Generous tread depth claws into a range of terrain, and is stabilized with Vittoria’s proprietary 4C compound layering process, allowing the surface of the tread to remain tacky, while the base remains planted - Wach effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance, and increased wear life - Substantial room was designed into the center tread to provide braking traction, while also accelerating cleaning - Cornering is handled by Vittoria’s trademark progressive sipe width technology, which gives a gummy inside effective edge, without instability - New Enduro Race Casing with insert below the tread provides additional puncture protection

High-volume casing, low-profile tread - Aggressive side knobs - Dual Compound - Lightweight XC race tire - Race-inspired low profile design Maxxis has done it again with its latest XC race tire. The new Maxxis Aspen pushes the limits of a lightweight XC tire designed to have minimal rolling resistance. The Aspen is designed with a high-volume casing to smooth out the roughest roots and rocks, while the dual compounds give optimal traction in the corners. So, if crossing the finish line first is your top priority, then the Aspen was designed for you.

- The Ikon is for true racers looking for a true lightweight race tire. - With 3C Triple Compound Technology, high-volume casing and a fast rolling tread design, the Ikon provides exemplary performance in all riding conditions. - As its name suggests, the Ikon represents all that is true in racing.

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!