Filter By:
- Bottom Brackets (25)
- Brakes/Levers/Pads (81)
- Cables (15)
- Cassettes/Freewheels (27)
- Chainrings (33)
- Chains (32)
- Cranksets (25)
- Derailleurs (41)
- Show More Categories
- Forks (5)
- Handlebar Grips/Tape (37)
- Handlebars (17)
- Headsets (5)
- Pedals (54)
- Saddles (31)
- Seatposts (13)
- Shifters (28)
- Stems (19)
- Tires/Tubes (245)
- Wheels (89)
- Other (112)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$135.00
Vanhelga is a fat bike tire designed for trail riding in loose snow. It brings traction to a new level with dual-compound rubber, triple-siped shoulder knobs, and an open tread pattern that sheds snow. Vanhelga sheds snow and tracks flawlessly when the trail becomes soft and sloppy.
- 120 TPI tubeless-ready casing
- Ramped center lugs for rolling efficiency
- Aggressively siping for grip
- Shovel-design side lugs for predictable braking and cornering
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear and stud loss.
- Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use
$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp.
- Laser-etched All-City logo
- Aluminum body with stainless steel hardware
$19.00 - $25.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.00 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.99 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$38.00
Cost effective stopping power from the leader in cable-actuated disc brakes.
- For use with short cable-pull levers
- Mono-block caliper design has outboard pad adjustment
- Spring tension is adjustable
- Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Short Pull
- Rotor Included: No
- Weight: 215 g
$95.00
This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware.
- For use with with long cable-pull levers
- Pad retraction and spring tension are adjustable
- Includes steel-backed organic pads
- Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Long Pull
- Rotor Included: No
- Weight: 204 g
$49.99
The Box Four cassette adapts our Prime 9 philosophy of durability, simplicity, and reliability at a great price point. All cogs are stamped from steel, given our durable black coating and then the larger cogs are pinned to each other with spacers for easy installation.
$77.99
The Box Three Rear Derailleur simplifies the features found on the Prime 9 Box One and Two rear derailleurs making for a fully featured wallet friendly rear derailleur. Including a Limited Slip Clutch, Sealed bearing pulleys and a solid construction Box Three Rear derailleurs are compatible with 11-46 and 11-50t derailleurs making it one of the most versatile derailleur offerings for Prime 9.
$24.00
Who does not love a nicely cleaned up cockpit?
This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec EV brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers or other remotes with with your I-Spec EV Shimano brake. Our BikeYoke I-Spec EV adapters are available as "left" or "right" side for Shimano brake levers and you can also flip sides if you prefer a certain more inward or outward remote position:
Compatible brakes:
- Deore BL-M6100/6120
- SLX BL-M7100/7120
- XT BL-M8100/8120
- XTR BL-M9100/9120
Compatible remotes/shift levers:
- BikeYoke Triggy serie
- OneUp Remote V2
- Specialized Command Post SLR
- Race Race Remote Turbine R
- SRAM EX1
- SRAM NX EAGLE
- SRAM GX / GX EAGLE / GX EAGLE AXS
- SRAM X1
- SRAM X01 / X01 EAGLE / X01 EAGLE AXS
- SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS
- Rock Shox Reverb AXS
$59.99
Choose our 2X remote for your dropper if you don't have enough space for a Triggy under your left side handle bar, for example if you are still running 2-by or 3-by shifting with front derailleur or if you have anoter remote for suspension or e-support. It also features a hinged clamp, that allows snapping your remote onto your handlebars without having to take off grips or brake levers.
The clamp is made from a high-tech plastic compound and aluminium. The paddle itself is made from 6061-T6 aluminum, black anodized and finished with a dark anodized BikeYoke logo.
Allowing a maximum of 10mm cable pull our 2X is compatible with any known dropper post on the market. The cable/wire is clamped via screw on the lever itself.
$59.99
Many dropper posts feature remotes, that do not live up to a standard, that you would expect, when paying a lot of money for a dropper post. Even the most expensive droppers out there often come with remotes, that have ridiculous play, are made from plastic, bulky, heavy, or just do not function as they could.
We put a lot of time and testing into the design of a remote lever that fulfils everything we want to see in a remote for dropper posts and since its introduction it has proven to be a favourite of many pro-riders and testers.
Features:
- Super lightweight (24g without clamp)
- Made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved
- You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp
- Exceptional finish and touch
- Individual mounting points to adjust position
- Integrated cable tensioner
- 12.5 mm of maximum cable pull
1 set Triggy includes:
- Remote lever unit (black anodized and laser engraved aluminum body and lever with cable tension adjuster)
- Shift cable
- Shift cable endcap
- 1x "Splits" clamp or I-Spec adapter (optional)
$64.99
Triggy Alpha - The name speaks for itself - the new pack leader of dropper remotes. Since the beginning our Triggy has proven to be a favourite among many many pro riders and testers but with Triggy Alpha we have now set the bar even higher and we confidently say: There is no better remote on the market.
The video is pretty much explaining very well what makes Triggy Alpha stand out amongst others:
- Ball bearing on the paddle
- Angle-adjustable paddle
- Black anodized aluminum body and paddle with laser engraved finish
- 2 available paddle lengths for crisp or soft dropper engagement
- 2 mounting holes
- Integrated cable tensioner
- Direct mount for almost any brake available (see mounting options)
- New cable clamping for universal dropper compatibility
- Extremely low weight: 32g/34g (short/long)
- Maximum cable pull: 11 mm
The short version mimics our proven original Triggy paddle geometry. The long variant features a 7mm longer paddle and reduces the required forces by about 15%.
Triggy Alpha is compatible with any commonly available aftermarket cable-actuated dropper post on the market.
1 set Triggy Alpha includes:
- 1x Triggy Alpha remote (short or long)
- 1x shift cable
- 1x wire endcap
- 1x BikeYoke Splits Clamp or I-Spec Adapter (optional)
$139.00
ID-beads (identity beads) foam is a completely new foam formula providing damping and perfect body shape adjustment
- Carbon reinforced shell\n- Carbon rails with a more classic design
- 3rd party web sales (eBay, Amazon, etc.) are strictly prohibited by the manufacturer
$349.99 - $390.00
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family.
Noteworthy updates of the REVIVE 2.0 include:
- One piece 3D-forged upper tube unit for improved stiffness and strength
- Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance
- CNC-finished actuation lever for even smoother engagement
- New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation
Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike?
BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off.
Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before.
To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced.
That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of.
The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play:
- Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand.
- This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike.
So, now one might already understand that:
- No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings.
- No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design
- The hydraulic system can be reset to “new” via the unique “REVIVE-valving”
- This means the hydraulic circuit is a very stable closed system and basically maintenance free.
Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability:
- Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play.
- Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes.
1 set REVIVE dropper post includes:
- 1x REVIVE Seatpost
- 1x cable housing 1500mm
- 1x inner wire 1700mm
- 2x housing endcap
- 1x barrel cable clamp
- 1x air valve adapter
- 1x Quick-Reset-Lever
- 1x remote (optional)
- 1x BikeYoke I-spec adapter or Splits Clamp (optional)
- 1 set titanium saddle bolts and nuts (optional)
$34.99
- Cold-forged chromoly construction
- 8 splines for removal
- Oversize 3-pawl design
- Heavy-duty use freewheel
- 13T and 14T fit Flip-Flop hubs only
- Speeds: Single
- Width: 3/32"
$6.00
This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.
$25.00
Those guys who said "Tubeless tires never get punctures"? They lied. The Blackburn Plugger Tubeless Tire Repar Kit is a quick, one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat. Mount it to your frame, tape it to your top tube, or strap it to your ankle like a shark knife. Just keep it close and it'll get you out of trouble. Pronto.
- Stores ten plugs.
- 27g tool only 47g tool with strap
$72.99
- Wide tooth profiling prevents chain drop without a chainguide
- Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains
- Constructed in Canada from 7075 aluminum
$5.99
Upgrade or refresh your Bontrager wheels.
Product details
- Replacement, high-quality rim strips that help prevent flat tires
- Compatible with nearly all common wheels
- Width refers to internal rim dimension
- Not Tubeless Ready
- Sold as singles
$9.49
The industry standard comes in all sizes.
Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability.
Product details
- 0.9mm wall thickness
- Equipped with removable valve cores
- 100% inspected for guaranteed quality
- Best value
$9.49 - $11.99
The industry standard comes in all sizes.
Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability.
- 0.9mm wall thickness
- Equipped with removable valve cores
- 100% inspected for guaranteed quality
- Best value
27-inch tire size equivalents
- 700cx 23 – 25 also fits 27 x 7/8 – 1
- 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4
- 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4
$9.49 - $13.99
The industry standard comes in all sizes
Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability.
- 0.9mm wall thickness
- Equipped with removable valve cores
- 100% inspected for guaranteed quality
- Best value
27-inch tire size equivalents
- 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4
- 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4
$12.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames.
- Features threaded eyelets for rear rack mounting solutions on unique bike frames
- Quick release (QR) versions include rubber lever grip
$13.99
$99.99
86% Off
The Kovee Comp offers unobstructed movement around the saddle during challenging rides where performance is just as essential as comfort. The durable design stands up to the rigors of the ride with a unique shape that gives confidence for both seated pedaling and out-of-saddle descents.
- Posture 3 Performance pelvic rotation for a balance of comfort and efficiency
- Soft cushion gel padding provides ultra comfort
- CRZ recess extends through the saddle nose enhancing soft tissue protection
- Size Specific Curvature ensures each saddle is designed specific to its width
- Unique suspended rail construction increases compliance for ultimate comfort
- Strategically-placed, multi-density padding for optimal comfort and performance
- inForm BioDynamic products optimize your natural movement for sustained, higher performance
$14.99
Bontrager's Dialed Kids Tire is a great choice when you need a sturdy, easy rolling replacement tire for your young rider's bike. It's perfect for pavement and bike paths.
- 27 TPI
- Wire bead
- Clincher
$14.99
Bontrager's Dialed Kids Tire is a great choice when you need a sturdy, easy rolling replacement tire for your young rider's bike. It's perfect for pavement and bike paths.
- Excels on sidewalks and streets
- Easy-rolling tread keeps kids riding smoothly
- 27 TPI
- Wire bead
- Clincher
- Max pressure: 50psi
- ETRTO: 44-305
- Weight: 360g
$14.99
Bontrager's Dialed Kids Tire is a great choice when you need a sturdy, easy rolling replacement tire for your young rider's bike. It's perfect for pavement and bike paths.
- Excels on sidewalks and streets
- Easy-rolling tread keeps kids riding smoothly
- 27 TPI
- Wire bead
- Clincher
- Max pressure: 50psi
- ETRTO: 47-406
- Weight: 505g
Page 1 of 32
Next page